Product Manual
Name：Bluetooth LED Controller V1.0
Model：ZJ-BLV(A)-XY0
I. Product Summarize
This controller support Bluetooth version 4.0 or above.
It can achieve remote control ,switch light,adjust brightness and color temperature.There are 16 million colors and dozens of light changing modes.In addition.
This controller is designed for LED strip, module etc. After easy installation and settings, you can use your Phone (IOS or Android system) to control. The remote control distance reach 30 meters indoor and more than 60 meters outdoor.
II.Technical Parameter:
Conection Methods | Bluetooth Version 4.0 |
Suitable Phone OS | Any OS support Bluetooth version 4.0 or above |
Software language | English |
Channels | 310:4A/CH,2CH 320:4A/CH,Warm W :1CH,Cool W:1CH 370:4A/CH,R:1CH,G:1CH,B:1CH 410:Imax:0.7A/CH,Vmax:30V,3CH 420:Imax:0.7A/CH,Vmax:30V, Warm W:1CH,Cool W:1CH 470:Imax:0.7A/CH,Vmax:30V, R:1CH,G:1CH,B:1CH |
Working Voltage | 310/320/370:DC12V-DC24V 410/420/470:Vmax:DC12-DC30V |
Working Temperature | -20℃-60℃ |
Effective Romoted Distance | No barrier,60m ;Indoor, 30m |
N.W | ≤61g |
G.W | ≤101g |
Waterproof | IP 25 |
Size | 86*45*23mm |
Ⅲ.MagicLight V1.0 Instruction
1. Install Magic LED Light V1.0
A .Search“Magic LED Light"in App store by iPhone, download for free and install it.
B.Download it by scanning QR code：
C.Directly download it on site:https://itunes.apple.com/us/app/magic-led-light/id667339109?ls=1&mt=8
Following pages show you how to install"Magic LED Light".
2. Connect Bluetooth LED Controller
Pls connect the controller with power supply by correct connection.Then open phone’s Bluetooth service.If your Bluetooth service is off ,Phone will antumatic pop-up a interface ”Turn On Bluetooth to Allow “Magic Light “to Connect to Accessories.Choose “Settings” first ,then “on “bluetooth .
3. Software Operating
a.Preview：
Though youcontroller haven’t connected, you can open operation interfacel by preview mode.
b.Reset：
Rescancontroller.
c.
White Vision
1.White ring: Press the white ring, choose any brightness you like.The brightness state will shows your choice.
- 2. All off：darkest
- 3. All on：brightest
- 4. Speed bar:
For “Strobe” or “Gradual” mode,speed can be adjusted.Total 31 grades of each mode : "1" is the slowest grade; "31" is the fastest grade.
- 5. Modes:
1) Strobe mode
2) Gradual mode
- 6. Run: Invalid in static color, valid for dynamic modes.
- 7. Open: ON/OFF.
Warm White and Cool White Vision：
- 1. Color temperature ring: Press the ring, choose any color temperature you like .The color temperature state will shows your choice.
- 2. All off：darkest
- 3. All on：brightest
- 4. Speed bar:
- 5. For “Strobe” or “Gradual” mode,speed can be adjusted. Total 31 grades of each mode : "1" is the slowest grade; "31" is the fastest grade.
- 6. Brightness: you can change it from 0-100%.
- 7. Modes:
1) Warm gradual
2) Cool gradual
3) Warm flash
4) Cool flash
- 8. Run: Invalid in static color, valid for dynamic modes.
- 9. Open: ON/OFF.
RGB Vision
- 1. Color ring: Press the color ring, choose any color as you like.The color will shows your choice.
- 2. All off：darkest of three channels(R,G,B)
- 3. All on：brightest of three channels(R,G,B)
- 4. Brightness bar: Sliding to the left ,light wil be more and more darkest;Sliding to the right,light will
be more and more bright.
- 5. Open: ON/OFF.
- 6. 20 built-in modes:
1) Press M-/M+ to choose modes, you can adjust the speed at the same time.
2) Total 31 grades of each mode:"1" is the slowest grade;"31" is the fastest grade.
3) Following are 20 built-in modes of RGBControl:
20 Built-in Modes
Number | Mode | Remarks |
1 | Seven color cross fade | Run: Invalid in static color, valid for dynamic modes. |
2 | Red gradual changing |
3 | Green gradual changing |
4 | Blue gradual changing |
5 | Yellow gradual changing |
6 | Cyan gradual changing |
7 | Purple gradual changing |
8 | White gradual changing |
9 | Red/Green gradual changing |
10 | Red/Blue gradual changing |
11 | Green/Blue gradual changing |
12 | Seven color strobe flash |
13 | Red strobe flash |
14 | Green strobe flash |
15 | Blue strobe flash |
16 | Yellow strobe flash |
17 | Cyan strobe flash |
18 | Purple strobe flash |
19 | White strobe flash |
20 | Seven color jumping changing |
7.How to edit mode:
*****************************************************************************************************************************
Warranty Time:
2 years(include scond year).Any problem caused by quality,we will provide free maintenance.
Remarks:
1.Pls don’t operate it when energized.
2.Pls don’t use it in areas which are full of metal and strong electromagnetic waves.Otherwise,effective remoted distance will be shortened significantly.
Notice:
1.Thanks for using our product .Pls read our product specification manual.When you use it ,it means that you have read our manual defaultly.
2.Our company have the right of exlanation and modification of all files equipped.Sorry for that we will not give you additional notice if there were many modifications.